By clicking “Accept”, you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing efforts. View our Privacy Policy for more information. View Preferences to choose specific cookie groups.
DenyAccept

82-Series

Heavy duty Power Arm for demanding environments.

Models Available

PA6082

5.9m (19'4")

PA6082VFR

6.1m (20'0")

PA6482

6.4m (21'0")

PA6482VFR

6.9m (22'8")

PA6582T

6.6m (21'8")

PA6582T-VFR

6.7m (22'0")

PA7282T-VFR

7.2m (23'7")

PA7782T

7.8m (25'7")

PA8082T

8.1m (26'7")

PA8082T-VFR

8.0m (26'3")

Horsepower Range

70HP | 85HP
Scroll Down

Overview

82-Series Power Arms come with full-width rear bumper bar, strobe lighting, choice of 70hp or 85hp hydraulics and an high-efficiency oil tank and cooling system.

Features

  • Hy-reach Arm Geometry
  • Parallel Arm Geometry
  • Power Slew
  • Cast Iron Pumps and Motors
  • High-efficiency oil tank
  • Full-width bumber bar
  • Proportional Electric Controls
  • Soft-Start Rotor Engagement
  • EDS Floatation
  • Strobe Lighting
  • 3, 4 or 5pt Mounting Options
  • Left or Right-Hand Build Options

Range Overview

PA6082

Max reach: 5.9m (19’4”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight:
Minimum tractor requirement: 120hp, 5,000kg

PA6082VFR

Max reach: 6.1m (20’0”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight:
Minimum tractor requirement: 120hp, 5,000kg

PA6482

Max reach: 6.4m (21’0”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight: 1,746kg
Minimum tractor requirement: 120hp, 5,000kg

PA6482VFR

Max reach: 6.4m (21’0”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight:
Minimum tractor requirement: 120hp, 5,000kg

PA6582T

Max reach: 6.6m (21’8”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight: 1,846kg
Minimum tractor requirement: 120hp, 5,500kg

PA6582T-VFR

Max reach: 6.7m (22’0”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight:
Minimum tractor requirement: 120hp, 5,500kg

PA7282T-VFR

Max reach: 7.2m (23’7”)
Hydraulic system: 70 or 85hp
Mounting: 3-point linkage (4 or 5-Point options)
Weight:
Minimum tractor requirement: 120hp, 5,500kg

PA7782T

Max reach: 7.8m (25’7”)
Hydraulic system: 70 or 85hp
Mounting: 5-point linkage
Weight: 1,933kg
Minimum tractor requirement: 120hp, 5,500kg

PA8082T

Max reach: 8.1m (26’7”)
Hydraulic system: 70 or 85hp
Mounting: 5-point linkage
Weight:
Minimum tractor requirement: 120hp, 5,500kg

PA8082T-VFR

Max reach: 8.0m (26’3”)
Hydraulic system: 70 or 85hp
Mounting: 5-point linkage
Weight: 2,291kg
Minimum tractor requirement: 120hp, 5,500kg

Advanced Features

Unique Oil Tank

High-efficiency oil tank and cooling system which deliver an outstanding de-aeration performance.

McConnel Valve Block

All 72-Series valve blocks are manufactured in-house for unrivalled performance and functionality.

Cast Iron Pump and Motors

Casted pumps, motors and gearboxes for added durability.

Soft-Start Rotor Engagement

A gradual transition to full power to protect hydraulic system.

Full-Width Rear Bumper

Heavy-duty bumper bar with integrated strobe lighting.

Tool Box

Lockable on-machine tool box.

Control Options

Motion Control System

Motion Control

A seven function (six proportional) controller with a compact short stick for light, intuitive fingertip control, and a full length new armrest.

Evolution Control System

Evolution

A seven function (six proportional) controller with a large joystick and integrated rollers for greater functionality at your finger tips.

Revolution Control System

Revolution

Revolution features eight proportional controls and two bang-bang functions; market-leading joystick technology; and advanced touch screen display for the ultimate Power Arm control.

Floatation Systems

McConnel enables you to work harder, faster and smarter thanks to a range of automatic floatation systems rather than relying on a manual operation. These advanced systems increase verge mowing speeds, reduce operator input and deliver a fast, effective cut without scalping.

LIFT FLOAT
Up to 8km/h

Pressurised accumulator enables 300mm of floatation travel for reduced operator input. Ground pressure settings adjusted manually.

ADVANCED FLOAT
Up to 15km/h

Electronic pressure sensing system that provides unlimited floatation travel. Ground pressure settings adjusted manually.

EDS (Easy Drive System)
Up to 18km/h

Awarding winning advanced floatation system that provides unlimited floatation travel and automatic ground pressure adjustment regardless of arm reach.

No floatation system (manual input only)
Automatic floatation
Power Arm Floatation

Armset Features

Parallel Arm Geometry

Maintains the height of the flailhead regardless of reach.

Hy-Reach Geometry

Ensures unrivalled close-in cutting positioning, regardless of height.

High Rocker Pillar

Provides superior over-fence clearance and down-bank reach.

Power Slew

100 degrees for slew for cutting out corners and compact transport position.

Mounting Options

3-Point linkage Mounting Option

3-Point Linkage

Universal mounting with integrated stabiliser frame for added strength and stability.

4-Point linkage Mounting Option

4-Point Hitch Mounting

Uses traditional three-point linkage mounting but also connects to the tractor’s pick-up hitch for extra stability.

3 to 5-Point linkage Mounting Option

3 to 5-Point Mounting

A sub-frame mounting kit that converts 3-point mounting Power Arms to a 5-point axle mounting configuration.

Attachments

1.2m Flailhead

1.2m Flailhead

With choice of MultiCut, TuffCut or Omega Rotors. Belt or direct drive options. Full width sliding mount.

1.5m Flailhead

1.5m Flailhead

With choice of MultiCut, TuffCut or Omega Rotors. Belt or direct drive options. Centre mounted.

1.6m Flailhead

1.6m Flailhead

With choice of MultiCut, TuffCut or Omega Rotors. Belt or direct drive options. Centre mounted.

Twincut Attachment

Twincut

1.2m or 1.5m cutting width with two Supercut rotors rotating in apposing directions for single pass cutting.

Sawhead Attachment

Multisaws

Tungsten-tipped saw blades capable of cutting material up to 215mm in diameter. Available in 3 or 4 blade options, with cutting widths of 1.5m, 2.0m, and 2.5m.

Cutterbar Attachment

Cutterbars

Choose between fine-cut or heavy-duty cutterbars with cutting capacities of 40mm and 110mm, respectively, without the risk of thrown debris. Available in cutting widths from 1.5m to 2.7m.

Rotary Head Attachment

Rotary Heads

McConnel offers a comprehensive range of rotary heads from 1.2m to 1.5m, designed for everything from heavy-duty mulching to fine-cut finishing.

Ditch & Grip Cleaner Attachment

Ditch and Grip Cleaner

Designed for clearing silt and vegetation from ditches and grips, featuring a heavy-duty 600mm cutting head and an adjustable spout. 3 models available.

Orbital Bracket Attachment

Orbital Head Bracket

Give your Power Arm an extra cutting dimension with an orbital head bracket - perfect for narrow lanes, siding-up and hard-to-reach places.

Quick Attach

Quick Attach Bracket

Change attachments quickly, easily, and safely with a quick attach bracket kit.

Debris Blower Attachment

Debris Blower

Clear grass and hedge cuttings from the highway with a hydraulically driven, fully adjustable debris blower.

Specification

Scroll sideways for full table

PA6082PA6082-VFRPA6482PA6482-VFRPA6582TPA6582T-VFRPA7282T-VFRPA7782TPA8082TPA8082T-VFR
Reach5.9m6.1m6.4m6.9m6.6m6.7m7.2m7.8m8.1m8.0m
Machine Weight*--1,746kg-1,846kg--1,933kg-2,291kg
Tractor HP Requirement120hp120hp120hp120hp120hp120hp120hp120hp120hp120hp
Tractor Weight Requirement5,000kg5,000kg5,000kg5,000kg5,500kg5,500kg5,500kg5,500kg5,500kg5,500kg

*Depending on machine specification excluding attachment and oil